Combined with pilot by state certification and accreditation certification implementation rules for the implementation experience, fully conducted specific products the adjustment of the implementation rules for compulsory certification, which LED drive power supply into the category of 3 c compulsory certification, September 1, the following announcement for state certification implementation rules:
Notice of the China national certification and accreditation regulatory commission.
The national committee for the recognition of the state council no. 23 of 2014.
Notice of the state council on the implementation of compulsory product certification
To comprehensively deepen reform, improve the system of compulsory product certification system, by commission accordance with the requirements of relevant laws and regulations, combined with pilot certification implementation rules for implementation experience, fully conducted specific products the adjustment of the implementation rules for compulsory certification revision work. The revised implementation rules for mandatory product certification have been announced (see annex 2- appendix 18, hereinafter referred to as the "new rules"). The new rules will be implemented as of September 1, 2014, and the replacement of the old rules is detailed in the comparison table information of annex 1.
Specify relevant certification institutions should be based on the new rules and published the requirement of the implementation rules for compulsory product certification general formulation corresponding product certification implementation rules, certification implementation rules shall be in September 1, 2014 to complete by commission certification supervision department for the record the rear can be specified in the field of relevant certification activities. From the date of implementation of the new rules, the designated certification authority shall implement the certification according to the new rules. Before the implementation of the new rules have been issued by the mandatory product certification can continue to use effectively, specify for renewal of the certification body certification conversion work should be taken to expire, standard version change, product changes and other natural transition to be complete.
Due to the continuous improvement of the technical development, the emergence of new products and the application standards of certification, this revision involves the following adjustments to the applicable products:
1. Under the category of "lighting appliance category -- ballast type", two products are added: "electronic ballasts for high-intensity gas discharge lamps, dc or ac electronic control devices for LED modules";
2. "low voltage electrical appliances category - leakage protector type" increase under the "household and similar use socket type residual current electrical appliances (SRCD)" a product, under a "low voltage electrical appliances category - type circuit breaker" increase "household and similar use B residual current circuit breaker (RCCB B type and B type RCBO), household and similar places with selective over-current protection circuit breaker (SMCB)" two products;
3. Under the category of "wire and cable", the "new product specifications and models" shall be added under "JB/ t8735.2-2011, JB/T8734.2~.6-2012".
The relevant designated certification authority shall carry out the certification implementation and publicity work for related production enterprises according to the new product status. The newly added products shall not be manufactured, sold, imported or used in other business activities without authorization from 1 September 2015.
|
